Industrial Waste Gas Treatment High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m³/h) Power (kW) 9-08 7.1D 2900 10635～12427 12292～19360 75～110 8D

16Mn Single Inlet High Air Flow Air Purification High Pressure Centrifugal Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder

Heavy Duty AC Motor Antiwear Foundry High Pressure Centrifugal Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short

HG785 Alloyed Steel V-Belt Driving Backward Metallurgy High Pressure Centrifugal Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light

Aluminium Alloyed High Temperature Oven Wall Cooling High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling,

Heavy Duty High Volume Air Purification High Pressure Centrifugal Fan Introduction Customized design according to customer's performance requirements, and optimized by CFD technology, the energy consumption is lower than similar models. The tight fit between the components and the good sealing performance ensure that the output pressure is not reduced. The impeller is subjected to a high standard of dynamic balance correction to ensure stable operation of the fan. After the

High Temperature Explosion Protection High Pressure Centrifugal Fan Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. The fans are divided into general

High Pressure Efficient Energy-Saving Centrifugal Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium are not more than 150

High Pressure Coupling Driving Building Ventilation Centrifugal Blower Fan Introduction It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also be used in cement kiln decomposition process, steel smelting and other special occasions use of high temperature fan (use heat resistant &

High Pressure Backward V-Belt Driven Materials Drying Centrifugal Fan Introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the Ministry of Machinery Industry. It has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area. Industrial