हमारे उत्पाद
कचरा इनसिनेरेटर उच्च मात्रा एयर ब्लोअर प्रेरित ड्राफ्ट फैन
Garbage Incinerator High Volume Induced Draft Air Blower Fan Introduction The 6-06 series dust exhaust centrifugal fan has the characteristics of low dust accumulation and wear resistant. Garbage Incinerator High Volume Induced Draft Air Blower Fan is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be used as a general ventilator for
फॉरवर्ड प्रेरित ड्राफ्ट आईडी फैन इन पावर प्लांट हीट डिस्क्रेशन
Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan Introduction Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan is also suitable for conveying air and non-corrosive, non-self-igniting, non
स्टॉकरफीड बॉयलर बॉयलर फैन पिछड़े केन्द्रापसारक फैन मुक्त खड़े प्रेरित
Stokerfeed Boiler Forced Draft Antifraying Backward Induced Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan is an
हेवी ड्यूटी प्रेरित ड्राफ्ट फैन बॉयलर आईडी मजबूर वेंटिलेटिंग कार्बन स्टील
Industrial Boiler ID Forced Ventilating Carbon Steel Heavy Duty Blower Fan Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. This
धुआँ निकास पीछे की ओर वक्रित केन्द्रापसारक पंखा प्रेरित ड्राफ्ट ब्लोअर
Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan Introduction The Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Long Lifetime Smoke Exhaust Backward Curved
घर्षण प्रतिरोधी प्रेरित ड्राफ्ट फैन वी बेल्ट प्रेरित केन्द्रापसारक फैन
Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan Introduction The 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow
बॉयलर के हानिकारक वायु निकास ब्लोअर में औद्योगिक प्रेरित ड्राफ्ट फैन
Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan Introduction Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also be used in cement kiln decomposition process, steel smelting
निकास ब्लोअर प्रेरित ड्राफ्ट फैन मजबूर वेंटिलेटिंग एयर निस्पंदन सिस्टम
Forced Ventilating Air Filtration System Induced Draught Exhaust Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be configured.
ऊर्जा की बचत केन्द्रापसारक प्रेरित ड्राफ्ट ब्लोअर हीट विखंडन कुशल
Heat Dissipation Efficient Energy-Saving Induced Draft Centrifugal Blower Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Centrifugal fan is applied in
मध्यम दबाव प्रेरित ड्राफ्ट फैन बॉयलर आईडी फैन सिंगल चौड़ाई सिंगल इनलेट
Industrial Boiler Forced Induced Draft Building Ventilation Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low
ऊर्जा दक्षता प्रेरित ड्राफ्ट फैन सिंगल इनलेट भट्टों ठंडा
Energy Efficiency Single Inlet Kilns Cooling Induced Draft Fan Introduction The 7-07 series high-pressure centrifugal fan has a high output pressure, can transport normal temperature or high temperature various gases and various forms of materials, and also can be used in harsh working environments. Such as conveying high temperature/harmful/dangerous gas, hard particles, powder, debris, fiber, forced ventilation, industrial dust collectors, air filtration systems, flue gas
औद्योगिक बॉयलर प्रेरित ड्राफ्ट फैन उच्च दबाव SIMO ब्लोअर लंबे जीवन
Industrial Boiler Induced Draft Antiwear Long Life Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.
SWSI केन्द्रापसारक फैन प्रेरित ड्राफ्ट फैन उच्च तापमान शीतलक
Coupling Driving High Temperature Cooling Induced Draft Blower Fan Introduction The Coupling Driving High Temperature Cooling Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Coupling Driving High Temperature Cooling Induced
एंटी वियर सिंगल सक्शन इंडिकेटेड ड्राफ्ट ब्लोअर हाई वॉल्यूम फैंस ब्लोवर्स
High Volume Antiwear Single Suction Induced Draft Blower Fan Introduction The High Volume Antiwear Single Suction Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more
स्टेनलेस स्टील प्रेरित ड्राफ्ट फैन पिछड़ा केन्द्रापसारक फैन तीन चरण
Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan Introduction The Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than
एंटी एब्स्रेसिव हाई एयर फ्लो पावर प्लांट फैन इंडस्ट्रियल सेंट्रीफ्यूगल ब्लोअर
Anti Abrasive High Air Flow V-Belt Driving Power Plant Industrial Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan
थर्मल पावर प्लांट में बड़े SIMO ब्लोअर कोयला निकाल बॉयलर बॉयलर
Large Capacity Coal-Fired Boiler Thermal Power Plant Air Blower Fan Introduction Large Capacity Coal-Fired Boiler Thermal Power Plant Air Blower Fan is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind
औद्योगिक भट्टों पावर प्लांट फैन मजबूर ड्राफ्ट सेंट्रीफ्यूगल ब्लोअर
Forced Draught Of Industrial Kilns Power Plant Centrifugal Blower Fan Introduction The Forced Draught Of Industrial Kilns Power Plant Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel
