हमारे उत्पाद
स्टेनलेस स्टील बायोमास वेंटिलेशन एंटी-धमाका बॉयलर केन्द्रापसारक फैन
High Temperature Stainless Steel Biomass Boiler Centrifugal Fan Introduction This series of id fan in boiler can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It is capable of outputting a higher outlet pressure while providing more gas flow with lower noise. Stable operation at higher media temperatures.The performance of the fan is
बिल्डिंग वेंटिलेशन धूल कलेक्टर फैन वी बेल्ट प्रेरित केन्द्रापसारक फैन
Long Life Building Ventilation V-Belt Driving Dust Collector Fan Introduction The Long Life Building Ventilation V-Belt Driving Dust Collector Fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3.
सिंटरिंग हीट डिसिपेरेशन HG785 Steel 2043pa पावर प्लांट फैन
Sintering HG785 Alloyed Steel Heat Dissipation Power Plant Blower Fan Introduction Of Centrifugal Fan Centrifugal fans generally use single-side air intake and use single-stage impellers; those with large flow can be air-intaken on both sides and use two back-to-back impellers, which are also called double-suction centrifugal fans. The principle of gas discharge: When the gas between the blades of the centrifugal fan rotates, the kinetic energy obtained by the centrifugal
वी बेल्ट ड्राइविंग मीडियम प्रेशर धमाका प्रूफ सेंट्रीफ्यूगल फ्लो फैन
V-Belt Driving Medium Pressure Explosionproof Centrifugal Flow Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The impeller is annealed to completely
कम शोर केन्द्रापसारक फैन हैवी ड्यूटी औद्योगिक ब्लोअर 1 साल की वारंटी
Industrial Building Ventilate Single Suction Dust Collector Blower Fan Introduction 1. When the pressure requirement is met, a large gas flow can be output, and the noise is very low. 2. The fan speed can be flexibly set by matching different diameters of belt pulley to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor sliding guides are provided for easy tensioning of the belt to reduce energy loss due to belt slack. 4. When the airflow
कोयला इंजेक्शन एंटी धमाका V बेल्ट 1820r / मिनट केन्द्रापसारक वेंटिलेशन प्रशंसक
Coal Injection Anti-Explosion V-Belt Driven Centrifugal Ventilation Fan Blower Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to
उच्च शक्ति स्टील प्रेरित फ्लैट प्रदर्शन वक्र के साथ ड्राफ्ट प्रशंसक
Q345 High Strength Steel Induced Draft Industrial Blower Fan Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. Q345 High Strength Steel Induced Draft Industrial Blower Fan can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in
हाई टेम्प फ्ल्यू गैस फैन हाई प्रेशर सेंट्रीफ्यूगल ब्लोअर धमाका प्रूफ
High Temperature High Pressure Flue Gas Centrifugal Blower Fan Introduction The High Temperature High Pressure Flue Gas Centrifugal Blower Fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. The High Temperature High Pressure Flue Gas Centrifugal Blower Fan is mainly used for blasting furnace blast and other forced air supply, and can also be used for
वी बेल्ट ड्रिफ्ट फोर्स्ड वेंटिलेशन धमाका प्रूफिंग एसी सेंट्रीफ्यूगल फैन
V-Belt Driven Explosion Proofing Forced Ventilating High Pressure Centrifugal Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short
सिंगल सक्शन हाई एयर फ्लो बैकवर्ड इंडस्ट्रियल एग्जॉस्ट ब्लोअर
Single Suction High Air Flow Backward Biomass Boiler Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the
फाउंड्री फर्नेस डस्ट कलेक्टर ब्लोअर फैन एयर ब्लोअर फॉर इंडस्ट्रियल यूज ब्लू एंड व्हाइट
Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan Introduction The Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly
हैवी ड्यूटी सेंट्रीफ्यूगल फैन हीट डिस्क्शन इंडस्ट्रियल डस्ट ब्लोअर
Industrial Equipments Heat Dissipation Dust Collector Centrifugal Blower Fan Introduction 1. The Industrial Equipments Heat Dissipation Dust Collector Centrifugal Blower Fan can output high outgas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. In the case of common base, the installation is very simple and requires little support from a professional technician. 3.
थर्मल पावर प्लांट एयर निकास ब्लोअर में प्रेरित ड्राफ्ट फैन
Power Plant Induced Draught Air Supply Antiwear Exhaust Blower Fan Introduction The 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Power Plant Induced Draught Air Supply Antiwear Exhaust Blower Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low
वी-बेल्ट ड्राइविंग लो प्रेशर बैकवर्ड कर्व्ड मटेरियल हैंडलिंग ब्लोअर
V-Belt Driving Low Pressure Backward Curved Material Handling Blower Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. Motor slide guide can be
डबल इनलेट वेंटिलेशन 3187pa प्रेरित ड्रॉफ्ट फैन बॉयलर
Double Inlet Efficient Energy-Saving Ventilation Induced Draft Fan Introduction: The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous
उच्च तापमान औद्योगिक बॉयलर एफडी ग्रिप गैस केन्द्रापसारक धौंकनी प्रशंसक
High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan Introduction The High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful
ग्रे ब्लू मटेरियल हैंडलिंग ब्लोअर स्टेनलेस स्टील सेंट्रीफ्यूगल फैन
Stainless Steel Efficient Energy-Saving Material Handling Centrifugal Fan Introduction The Stainless Steel Efficient Energy-Saving Material Handling Centrifugal Fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. Stainless Steel Efficient Energy-Saving Material Handling Centrifugal Fan belongs to small flow and medium pressure series. Stainless Steel Efficient Energy-Saving Material Handling
सिंगल इनलेट फॉरवर्ड 4909-9817 एम 3 / एच डस्ट कलेक्टर ब्लोअर फैन एल्युमिनियम अलॉयड
Single Inlet Aluminium Alloyed Forward Dust Collector Blower Fan Detail introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Product
